Network printer under Windows XP

Januar 28, 2009 on 10:07 am | In Allgemein, Fotokopierer |

1. It assigns the printer an appropriate IP number (Example: 192.168.1.1 - DHCP server or router. printer 192.168.1.10). You can check which network you are on where you click Start -> Run -> cmd go. In the next window, type ipconfig-all,. The 3 numbers left at e.g. “IP address or DHCP server or a default gateway” is your “network”. The number far right only once in your network occur. The IP number for the printer, you usually have an Internet Explorer or an installation CD of the printer manufacturer. Where once an IP number for the printer can usually related settings entered via the web browser. Next, you can also toner stands retrieve the device. This simply enter the IP number of the printer in the browser.
2. Now if your printer is also about the ping command reachable. To do so on a Win XP computer, click Start -> Run -> type cmd. In the next window, type ping 192.168.1.10 (the IP number of the printer, in our example 192.168.1.10) an. 3x Now you should get response from 192.168.1.10.
3. Now go to Start -> Settings -> printer and Faxes to add printers. When the “Welcome to Windows” press continue to go in the next frame on “Local printer attached to the PC is” and more. Next, your system will find and tell the printer is not found, you also confirm this with more. In the next window, go to “a new port” and on the right site on the drop down menu, select “Standard TCP / IP Port” and confirm again with more.
4. Now, a new assistant will be opened in the IP number of the printer can enter. The welcome screen allows you to confirm. In the second window, type in “printer name or IP address is the IP number of the printer (in our example 192.168.1.10). Now in the top row 192.168.1.10 and on the bottom line is IP_192.168.1.10. If yes confirm with more. In the next window should Standard Generic Network Card box to confirm you are here with more. In the next window, you see the summary of the then finish can confirm.
5. Now back to the printer Assistant. Here you will find either your printer, or you have to be the drivers from a CD or other install path. Again, with further confirmation. The next screen allows you to have a suitable printer name or you can keep the suggested. Next, you can choose whether this printer your default printer should be. Confirm this page with more. In the next window, you can click on whether a test page to be printed or not. Click continue and finish. The drivers are installed, and if given a test page is sent to the printer.